CT-2738 8 CHANNELS RELAY OUTPUT 1A/30VDC/30W
Product Feature:
Module features
◆ 8-channel relay normally on output
◆ 8 LED channel indicators
◆ Low on resistance (≤100mΩ)
◆ With isolation between channels
◆ Built-in TVS bidirectional diode, built-in RC circuit
◆ Resistive and inductive loads can be connected
CN-8032 Profinet network Bus adapter
1, Supports standard Profinet IO Device Communication.
2,Supports MRP media redundancy, and it could realize ring network redundancy.
3, Supports RT/IRT real-time and synchronous communication mode, with its RT real-time communication minimum period of 1ms and IRT synchronous communication minimum period of 250us.
4, Supports the maximum input of 1440 bytes, maximum output of 1440 bytes, and 32pcs of the extended IO modules
ODOT CN-8032-L：PROFINET NETWORK ADAPTER
CN-8033: ETHERCAT NETWORK ADAPTER
CN-8034: ETHERNET/IP NETWORK ADAPTER
CN-8011: MODBUS-RTU BUS ADAPTER
Product Feature:
CN-8011 Modbus-RTU Bus Adapter
Module Overview
CN-8011 Modbus-RTU network adapter supports standard Modbus-RTU communication, it supports function code of 01/02/03/04/05/06/15/16/23, and this device could monitor the IO module communication state in real time.
CN-8031：MODBUS TCP NETWORK ADAPTER
Product Feature:
ODOT CN-8031 Modbus TCP Adapter CN-8031 Modbus TCP Network Adapter supports the standard Modbus TCP Server Communication, and Ethernet supports the cascade function of dual-port switches.This adapter supports access to 5 Modbus TCP clients simultaneously, supports Modbus function code 01/02/03/04/05/06/15/16 /23, supports the Modbus application of watchdog, supports the process data maximum sum of input and output of 8192 bytes, and supports number of the extension IO module of 32. Module carries with the diagnostic function and it could monitor the communication status of IO module in real time. Please watch our latest Remote IO video at youtube: https://www.youtube.com/watch?v=O86lTEV8UdM&pp=sAQA
CN-8021：CANOPEN BUS ADAPTER
Product Feature:
CANopen is an open and flexible high-level protocol with more and more applications. Based on the CAN bus, it combines low cost and high performance, and provides an attractive distributed control solution for industrial automation, medical devices, public transportation, elevators, maritime electronics, and other applications.
CN-8013 CC-LINK BUS COUPLER IO NETWORK ADAPTER
Product Feature:
CN-8013 CC-Link bus adapter supports standard CC-Link Ver.2 communication and it could monitor the communication status of IO modules in real time.
CT-2754 4 CHANNELS RELAY OUTPUT, WITH RC & FLYBACK DIODE, CHANNEL ISOLATED, 3A@30VDC(INDUCTIVE LOAD & RESISTIVE LOAD)
Product Feature:
CT-2754 4 channels relay output,3A/30VDC/90W , with RC with flyback diode, with channel isolation
Module features
◆ 4-channels relay normally on output
◆ 4 LED channel indicators
◆ Low on resistance (≤100mΩ)
◆ With isolation between channels
◆ Built-in unidirectional (freewheel diode) FWD, built-in RC circuit
◆ Resistive and inductive loads can be connected
MTC034 & MTE034 DX210-3SFX- 2000 32 CHANNELS SCREW TERMINAL /MALE CONNECTOR
CT-732F 18 CHANNELS FIELD POWER DISTRIBUTION MODULE（PE）
CT-731F 18 CHANNELS FIELD POWER DISTRIBUTION MODULE（24VDC）
CN-8012: PROFIBUS-DP BUS ADAPTER
CT-730F 18 CHANNELS FIELD POWER DISTRIBUTION MODULE（0VDC）
Product Feature:
CT-730F 18 channels field power distribution module
Module features
◆ Support on-site power distribution, output is 0VDC.
◆ Support expansion of 18 channels. ◆ Requires no configuration and occupies no slot in configuration.
CT-5331 CANOPEN MASTER STATION IO MODULE
Product Feature:
The CANopen master module supports 1 x CAN interface , supports the CANopen master working mode .
The CT-5331 could be applied with the I/O adapter modules , so it could convert CANopen into other protocols ,such as Modbus-TCP,
Profinet, EtherCAT, Ethernet/IP, etc.When the module is used, input and output commands need to be configured in the IO Config software
through the Type-C interface of the module.
All slave devices that support the CANopen protocol can use this module to interconnect with the upper PLC or the upper computer,
Such as: CANopen remote IO station, CANopen various sensors, CANopen drivers and so on.
CT-3848 8 CHANNELS ANALOG INPUT THERMOCOUPLE (TC-J/K/E/T/S/R/B/N)
Product Feature:
Module features
◆ Filter parameters can adjustable
◆ The module supports 8-channel thermocouple signal acquisition
◆ The module carries with 8analog LED indicators
◆ The module supports 9 kinds of conventional thermocouple temperature measurement type
◆ The internal bus of the module and field input adopts magnetic isolation
◆ The module input channel supports TVS overvoltage protection
◆ 24-bit ADC resolution (Σ-δ type)
CT-3234 4 CHANNELS ANALOG INPUT /0&4-20MA/15-BITS
Product Feature:
Module features
◆ The module supports 4-channel current signal acquisition.
◆ The module can be configured for 0-20mA or 4-20mA current signal acquisition.
◆ The module supports 2-wire (non-loop output, external power supply is required) or 4-wire current sensor input.
◆ The internal bus of the module and field input adopts magnetic insulation.
◆ The module input channel is connected to the field active analog signal current output sensor.
◆ The module channel equips with TVS overvoltage protection.
CT-3734 4 CHANNELS RTD-PT100 TEMPERATURE ACQUISITION MODULE
Product Feature:
Module features
◆ The module supports 4-channel RTD thermal resistance (PT100) temperature acquisition
◆ The channels are isolated, and the isolation voltage is 1500V
◆ The module could be connected to a 2-wire or 3-wire PT100 temperature sensor
◆ The internal bus of the module and field input adopts magnetic isolation
◆ The module carries with 4 analog input channel LED indicator
◆ 15-bits ADC resolution
CT-3844 4 CHANNELS ANALOG INPUT THERMOCOUPLE(TC-J/K/E/T/S/R/B/N)
Product Feature:
Module features
◆ Filter parameters can adjustable
◆ The module supports 4-channel thermocouple signal acquisition
◆ The module carries with 4 analog LED indicators
◆ The module supports 9 kinds of conventional thermocouple temperature measurement type
◆ The internal bus of the module and field input adopts magnetic isolation
◆ The module input channel supports TVS overvoltage protection ◆ 24-bit ADC resolution (Σ-δ type)
CT-3723 3 CHANNELS RTD-PT1000 TEMPERATURE ACQUISITION MODULE
Product Feature:
Module features
◆ The module supports 3-channel RTD thermal resistance (PT1000) temperature acquisition
◆ The module could be connected to a 2-wire or 3-wire PT1000 temperature sensor
◆ The internal bus of the module and field input adopts magnetic isolation
◆ The module carries with 3 analog input channel LED indicator
◆ 15-bits ADC resolution
CT-121F: 16 CHANNEL DIGITAL INPUT/24VDC/ SINK TYPE
Product Feature:
CT-121F：16 channel digital input/24VDC/ Sink type/The input high level is valid
Module features
◆ the module supports 16 channels digital input, supports sink input, and input voltage is 24VDC.
◆ the module can collect digital output signal of field equipment (dry contact or active output).
◆ the module can be accessed to 2-wire or 3-wire digital sensor.
◆ the internal bus and field input of the module use opto-isolator.
◆ the module supports the input signal holding function, and the holding time can be set.
◆the module carries 16 digigtal input channels with LED indicator on each channel.
◆ supports counting function, by adding counting sub-module.
◆ each input channel of the module supports a 32-bit counter with the counting frequency <200Hz.
◆ the module can set the digital signal input filtering time and the byte transmission order of the counter.
◆ each channel of the module can set the counting mode and counting direction independently.
CT-3134 4 CHANNELS VOLTAGE INPUT
Product Feature:
CT-3134 4 channels Voltage Input 0~5/0~10/±5/±10VDC,15 bits /16 bits
Module features
◆ The module supports 4 channels of voltage signal input
◆ The module can capture 0~5VDC, 0~10VDC, ±5VDC, ±10VDC,with 15 bits, 16 bits resolution
◆ The module carries with 4 analog input channel LED indicator
◆ The module input signal is a single ended common grounding input
◆ Filtering time can be set
◆ Channels can be disabled independently
◆ With isolation between channels
CT-7339 18 CHANNELS FIELD POWER DISTRIBUTION MODULE（24VDC/0VDC）
Product Feature:
Module features
◆ Support on-site power distribution, output is 24VDC/0VDC
◆ Support expansion of 18 channels ,9 channels of 24VDC ,9 channels of 0VDC.
◆ Requires no configuration and occupies no slot in configuration.
CT-7346 18 CHANNELS FIELD POWER DISTRIBUTION MODULE（24VDC/0VDC/PE）
Product Feature:
Module features
◆ Support on-site power distribution, output is 24VDC/0VDC.
◆ Support expansion of 18 channels ,6 channels of 24VDC ,6 channels of 0VDC ,6 channels of PE.
◆ Requires no configuration and occupies no slot in configuration.
CT-7220: POWER SUPPLY EXTENSION MODULE 5V/2A
CT-623F: 8 DIGITAL INPUT&8 DIGITAL OUTPUT /24VDC/ SOURCE OR SINK
Product Feature:
CT-623F: 8-channel digital input /24VDC/ source or sink type & 8-channel digital output /24VDC/ source type
Module features
◆ The module supports 8-channel digital input, and supports source type and sink type two-way input. The input voltage is 0V/24VDC.
◆ The module supports 8-channel digital output, Output high level valid, and the output voltage is 24VDC.
◆ Module input channel can collect digital output signal of field equipment. (dry contact or active output)
◆ The module input channel can be connected to the 2-wire or 3-wire digital sensor.
CT-5321: MODBUS SERIAL PORT MODULE
Product Feature:
CT-5321 Modbus Serial Port Module
1 Module Description
The Modbus serial port module supports 1 channel RS485/RS232 /RS422(optional), supports Modbus RTU/ASCII protocol, and supports master, slave and free transparent transmission mode.
The serial Module CT-5321 could be applied with the adapter modules, so it could convert Modbus into other protocols such as Modbus TCP, Profinet, EtherCAT, EtherNet/IP, etc. When the module is used, serial port parameters and Modbus instructions should be configured in IO Config software.
Devices with RS485/RS232/RS422 interface, which support modbus-RTU/ASCII, could be applied with CT-5321 to realize interconnection with upper PLC or upper computers. CT-5321 could be applied with devices such as: PLC, DCS, remote IO, VFD, motor start protection device, intelligent high and low voltage electrical apparatus, power measurement device, intelligent field measurement equipment and instruments, etc.
CT-5721: BUS EXTENDED SLAVE MODULE
CT-5801: TERMINAL MODULE
Product Feature:
CT-5801: Terminal module Terminal modules are used to stabilize the internal bus communication.
Each C series I/O protocol adapter must be equipped with 1pc of terminal module CT-5801 no matter how many sub-modules are connected.
The dustproof terminal could cover the internal bus and field power supply hardware of the last IO module.
And terminal modules have no process data and configuration parameters.
* Take no module channel and replace CT-5800.
CT-5112 2-CHANNEL ENCODER INPUT/24VDC
Product Feature:
Module features
◆ the module supports two channels of encoder input.
◆ each encoder channel supports A/B incremental encoder or pulse-directional encoder input.
◆ each encoder channel supports orthogonal A/B signal input, input voltage 24V, and it supports source and sink input.
◆ the incremental encoder mode supports x1/ x2 / x4 frequency multiplication mode.
◆ the pulse – direction mode supports nondirectional signal, pulse input only.
◆ each encoder channel supports 1 digital input signal with an input voltage of 5Vdc or 24Vdc.
◆ each encoder channel supports 1 digital output signal with an output voltage of 24Vdc.
◆ each encoder channel supports 1 way of 24V power output, which can be connected to the encoder for power supply.
◆ the module internal bus and field input adopt magnetic isolation.
◆ the module carries 16 LED indicators.
◆ the maximum input frequency of the encoder supported by the module is 1.5MHz.
◆ the module supports measurement function, it could detect the load speed or input signal frequency.
CT-5711: BUS EXTENDED MASTER MODULE
Product Feature:
CT-5711 Bus extended master module
Module Description
The bus extened master module is used to extend the bus.The bus extended master module has no process data and configuration parameters.
CT-222F: 16 CHANNEL DIGITAL OUTPUT/24VDC/SOURCE TYPE
CT-122F: 16 CHANNELS DIGITAL INPUT/0VDC/SOURCE TYPE
Product Feature:
CT-122F 16 channels digital input/0VDC/Source type/Input 0V, the input low level is valid
Module features
◆ the Module supports 16 channels digital input, supports source input, the input voltage is 0V and the input low level is valid.
◆ the module could collect the digital output signal of field equipment (dry contact or active output).
◆ the module can be connected to a 2-wire or 3-wire digital sensor.
◆ the internal bus of the module and field input are isolated by optocoupler.
◆ the module supports input signal holding function, holding time can be set.
CT-221F: 16 CHANNELS DIGITAL OUTPUT/24VDC/SINK TYPE
Product Feature:
CT-221F 16 channels digital output/24VDC/Sink type/output is 0V, the output low level is valid
Module features
◆ the module supports 16 channels digital output, the output voltage is 0V and the output low level is valid.
◆ the module can drive field equipment (relay, solenoid valve, etc.)
◆ the internal bus and field output of the module both adopt electromagnetic isolation
◆ the module carries 16 digital output channel LED indicator
◆ the module has the function of thermal shutdown and over current protection
CT-124D 32-CHANNEL DIGITAL INPUT/24VDC/SINK OR SOURCE
Product Feature:
◆ The module supports 32 channels of digital input, supports high-level input, and could be connected to PNP sensor, and supports low-level input, and could be connected to NPN sensor.
◆ The module can collect the digital output signal (dry contact or active output) of the field device.
◆ The module can be connected to 2-wire or 3-wire digital sensor.
◆ The internal bus and field input of the module are isolated by optocoupler.
◆ The module supports the input signal holding function, and the holding time can be set.
◆ After adding the counting submodule, the counting function is available.
◆ Each input channel of the module supports 32-bit counter, and the counting frequency < 200Hz.
◆ The module can set the digital signal input filtering time and counter byte transmission sequence.
◆ The module can independently set the counting mode and counting direction for each channel.
CT-124H：32 CHANNELS DIGITAL INPUT/24VDC/SINK OR SOURCE TYPE
Product Feature:
CT-124H: 32 channels digital input, sink or source, 34Pin male connector, 24Vdc, counting function supported (counting frequency up to 200Hz)
◆ the module supports 32 channels digital input, it supports sink input and the input high level is valid as it could support PNP sensor; it also supports source input and the input low level is valid as it could support NPN sensor.
◆ the module could collect the digital output signal of field equipment (dry contact or active output).
◆ the module could be connected to 2-wire or 3-wire digital sensor.
◆ the internal bus of the module and field input are isolated by optocoupler.
◆ the module supports input signal holding function, holding time can be set.
◆ after adding counting submodule in ODOT configured software, the counting function is effective.
◆ each input channel of the module supports 32-bit counter with counting frequency <200Hz.
◆ the module could be set the digital signal input filter time and counter byte transmission sequence.
◆ each channel of the module could be set the counting mode and counting direction independently
CT-222D 32 CHANNELS DIGITAL OUTPUT/24VDC/SINK
Product Feature:
◆ The module supports 32 channels digital output; the output voltage is 24VDC and the output high level is valid.
◆ Module can drive field equipment. (relay, solenoid valve, etc.)
◆ The internal bus of the module and field output are using opto-coupler.
◆ The module carries 32 digital output channel LED indicator light.
◆ The module has the functions of thermal shutdown and overcurrent protection.
◆The module supports short circuit protection and overload protection.
CT-1218 8 CHANNELS DIGITAL INPUT/24VDC/PNP
Product Feature:
CT-1218: 8 channels digital input/24VDC/PNP
◆the module supports 8 channels digital input, supports sink input，and the input voltage is 24VDC and the input high level is valid. It could support PNP sensor.
◆the module could collect digital output signal of field equipment (dry contact or active output).
◆the module could be accessed to 2-wire or 3-wire digital sensor.
◆the internal bus and field input of the module use opto-isolator.
◆the module supports the input signal holding function, and the holding time can be set.
◆the module carries 8 digigtal input channels with LED indicator on each channel.
◆supports counting function, by adding counting sub-module.
◆each input channel of the module supports a 32-bit counter with the counting frequency <200Hz.
◆the module could be set the digital signal input filtering time and the byte transmission order of the counter.
◆each channel of the module could be set the counting mode and counting direction independently.
CT-1228 8 CHANNELS DIGITAL INPUT/24VDC/NPN
Product Feature:
CT-1228: 8 channels digital input/24VDC/NPN
◆ the module supports 8 channels digital input, and the input low level is valid. It could support NPN sensor.
◆ the module could collect digital output signal of field equipment (dry contact or active output).
◆ the module could be accessed to 2-wire or 3-wire digital sensor.
◆ the internal bus and field input of the module use opto-isolator.
◆ the module supports the input signal holding function, and the holding time can be set.
◆ the module carries 8 digigtal input channels with LED indicator on each channel.
◆ supports counting function after adding counting sub-module.
◆ each input channel of the module supports a 32-bit counter with the counting frequency <200Hz.
◆ the module could be set the digital signal input filtering time and the byte transmission order of the counter.
◆ each channel of the module could be set the counting mode and counting direction independently.
CT-222H: 32 CHANNELS DIGITAL OUTPUT, SOURCE, 24VDC/0.5A，34PIN MALE CONNECTOR
Product Feature:
CT-222H: 32 channels digital output, source, 24Vdc/0.5A，34Pin male connector
◆ the module supports 32 channels digital output; the output voltage is 24VDC and the output high level is valid.
◆ module can drive field equipment. (relay, solenoid valve, etc.)
◆ the internal bus of the module and field output are using opto-coupler.
◆ the module carries 32 digital output channel LED indicator light.
◆ the module has the functions of thermal shutdown and overcurrent protection.
◆ the module supports short circuit protection and overload protection.
CT-2228: 8 CHANNEL DIGITAL OUTPUT/24VDC/ SOURCE TYPE
Product Feature:
Module features
◆ the module supports 8-channel digital output, output high level effective, and output voltage 24V
◆ the module could drive field equipment (relay, solenoid valve, etc.)
◆ the module internal bus and field output are isolated by optocoupler
◆ the module carries with 8 digital output channel LED indicator
◆ the module has the functions of thermal shutdown and overcurrent protection
◆ the module supports short circuit protection and overload protection
CT-2218 8 CHANNELS DIGITAL OUTPUT/24VDC/NPN
Product Feature:
◆The module supports 8-channel digital output,
the output voltage is 0VDC and the output low level is valid.
◆The module could drive field equipment (relay, solenoid valve, etc.).
◆The module internal bus and field output are isolated by optocoupler.
◆The module carries with 8 digital output channel LED indicator.
◆The module has the functions of thermal shutdown and short-circuit protection.
CT-2224: 4 CHANNEL DIGITAL OUTPUT/24VDC/ SOURCE TYPE
Product Feature:
CT-2224: 4 channel digital output/24VDC/ Source type
◆the module supports 4-channel digital output, the output voltage is 24VDC and the output high level is valid.
◆the max output current of DO single channel is 3.3 A.
◆the module could drive field equipment (relay, solenoid valve, etc.)
◆the module internal bus and field output are isolated by optocoupler
◆the module carries with 4 digital output channel LED indicator
◆the module has the functions of thermal shutdown and overcurrent protection
◆the module supports short circuit protection and overload protection
CT-2718: 8 CHANNEL RELAY OUTPUT 2A/30VDC/60W
Product Feature:
IO Config V1.0.0.6(Fully with .NET4.0.rar|CT-2718.pdf
CT-2718: 8 channel relay output 2A/30VDC/60W
Module features
◆ 8-channel relay normally on output
◆ 8 LED channel indicators
◆ Low on resistance (≤100mΩ)
◆ 250VAC/220VDC the max. switch voltage is 250VAC/220VDC
CT-3168: 8 CHANNEL VOLTAGE INPUT
Product Feature:
CT-3168 8 channel Voltage Input 0~5/0~10/±5/±10VDC, 15Bit/16 Bit
Module features
◆ the module supports 8 channels of voltage signal input
◆ the module could collect 0~5VDC, 0~10VDC, ±5VDC, ±10VDC, with a 15-bit or 16-bit resolution
◆ The module carries with 8 analog input channel LED indicator
◆ The module input signal is a single ended common grounding input
◆ filter time could be set
◆ channels could be disabled independently
CT-3804: 4 CHANNELS ANALOG INPUT
Product Feature:
CT-3804: 4 channels Analog Input, Thermocouple(J type, K type, E type, T type, Stype, R type, B type, N type)
Module features
◆ The module supports 4-channel thermocouple signal acquisition
◆ The module carries with 4 analog indicators
◆ The module supports 9 kinds of conventional thermocouple temperature measurement type
◆ The internal bus of the module and field input adopts magnetic isolation
◆ The module input channel supports TVS overvoltage protection
◆ 24-bit ADC resolution (Σ-δ type)
CT-4154: 4 CHANNELS VOLTAGE OUTPUT 0~5VDC/0~10VDC/±5VDC/±10VDC,16 BITS
Product Feature:
CT-4154 4 channels Voltage Output 0~5VDC/0~10VDC/±5VDC/±10VDC,16 bits
Module features
◆The module supports 4 channels voltage signal output
◆ Output range： 0~5VDC, 0~10VDC, ±5VDC, ±10VDC, 16 bits
◆ The module carries with 4 analog output LED indicators
◆ Module output signal is single – ended common – grounded output
CT-3713: 3-CHANNEL RTD-PT100 TEMPERATURE ACQUISITION MODULE
Product Feature:
CT-3713: 3-channel RTD-PT100 temperature acquisition module
Module features
◆ The module supports 3-channel RTD thermal resistance (PT100) temperature acquisition
◆ The module could be connected to a 2-wire or 3-wire PT100 temperature sensor
◆ The internal bus of the module and field input adopts magnetic isolation
◆ The module carries with 3 analog input channel LED indicator
◆ 15-bit ADC resolution
CT-4158: 8 CHANNELS VOLTAGE OUTPUT 0~5VDC/0~10VDC/±5VDC/±10VDC, 16BITS
Product Feature:
Module features
◆The module supports 8 channels voltage signal output
◆ Output range： 0~5VDC, 0~10VDC, ±5VDC, ±10VDC， 16 bits
◆ The module carries with 8 analog output LED indicators
◆ Module output signal is single – ended common – grounded output
CT-3808: 8 CHANNELS ANALOG INPUT,THERMOCOUPLE
Product Feature:
CT-3808: 8 channels Analog Input,Thermocouple（ J type, K type, E type, T type, Stype, R type, B type, N type）
◆ The module supports 8-channel thermocouple signal acquisition
◆ The module carries 8 analog LED indicators
◆ The module supports 9 kinds of conventional thermocouple temperature measurement type
◆ The internal bus of the module and field input adopts magnetic isolation
◆ The module input channel supports TVS over-voltage protection
◆ 24-bit ADC resolution (Σ-δ type)
CT-4234: 4-CHANNEL ANALOG OUTPUT
Product Feature:
IO Config V1.0.0.6(Fully with .NET4.0.rar|CT-3804.pdf
◆ 2 output ranges can be set(0-20mA、4-20mA)
◆ The module internal bus and field output adopts magnetic insulation
◆ Single-terminal grounded together output mode
CT-3238: 8-CHANNEL ANALOG INPUT
Product Feature:
CT-3238: 8-channel analog input /0&4-20mA/15-bit single-terminal
◆ The module supports 8-channel current signal acquisition.
◆ The module can be configured for 0-20mA or 4-20mA current signal acquisition.
◆ The module supports 2-wire (non-loop output, external power supply required) or 4-wire current sensor input.
◆ The internal bus of the module and field input adopts magnetic insulation.
◆ The module input channel is connected to the field active analog signal current output sensor.
◆ The module channel equips with TVS over-voltage protection.
CT-3268 8 CHANNELS ANALOG INPUT /0～20MA OR -20~0MA OR ±20MA /15BIT SINGLE-ENDED BIPOLAR
Product Feature:
CT-3268: 8 channels analog input /0～20mA OR -20~0mA OR ±20mA /15bit Single-ended bipolar
◆ the module supports 8-channel current signal acquisition.
◆ the module can be configured for 0~20mA OR -20~0mA OR ±20mA current signal acquisition.
◆ the module supports 2-wire (non-loop output, external power supply is required)
◆ the internal bus of the module and field input adopts magnetic insulation.
◆ the module input channel is to be connected to the field active analog signal current output sensor.
◆ the module channel equips with TVS over-voltage protection.
CT-5102 2-CHANNEL ENCODER INPUT /5VDC
Product Feature:
Module features
◆ the module supports two channels of encoder input.
◆ each encoder channel supports A/B incremental encoder or pulse-directional encoder input.
◆ each encoder channel supports orthogonal A/B signal input, input voltage 5V, and it supports source and sink input.
◆ the incremental encoder mode supports x1/ x2 / x4 frequency multiplication to be selectable.
◆ the pulse – direction mode supports nondirectional signal, pulse input only.
◆ each encoder channel supports 1 digital input signal with an input voltage of 5Vdc or 24Vdc.
◆ each encoder channel supports 1 digital output signal with an output voltage of 5Vdc.
◆ each encoder channel supports 1 way of 5V power output, which can be connected to the encoder for power supply.
◆ the module internal bus and field input adopt magnetic isolation.
◆ the module carries 16 LED indicators.
◆ the maximum input frequency of the encoder supported by the module is 1.5MHz.
◆ the module supports measurement function, it could detect the load speed or input signal frequency.
CT-5122 2-CHANNEL ENCODER/SSI INPUT
Product Feature:
Module features
◆ the module supports two channels of SSI encoder input.
◆ each encoder channel supports SSI absolute encoder signal input.
◆ each encoder channel supports 1 digital input signal with an input voltage of 5Vdc or 24Vdc.
◆ each encoder channel supports 1 digital output signal with an output voltage of 5Vdc.
◆ the module internal bus and field input adopt magnetic isolation
◆ the module carries 16 LED indicators.
◆ the module supports the maximum clock frequency of 2MHz.
◆ the encoder reading interval time could be set.
◆ The data bit length and the start and end bit positions could be set.
