ODOT B32 / B64 SERIES INTEGRATED I/O MODULE-BOX-32 / 64

Product Feature:

ODOT B series integrated I/O module consists of communication board (COMM board) module and extended IO module. The COMM board could select the corresponding bus module according to the communication interface of the controller system. The mainstream industrial communication protocols include Modbus, Profibus-DP, Profinet, EtherCAT, EtherNet/IP, CANopen, CC-Link, PowerLink, etc. The extended I/O module is divided into six categories: digital input module, digital output module, analog input module, analog output module, special module, and hybrid I/O module.

The COMM board and extended IO modules could be freely combined based on site requirements. The integrated IO module could lower the cost when there are few data points.

BT-5102 2 CHANNELS ORTHOGONAL/PULSE ENCODER INPUT, 5V SINGLE-ENDED, CODE : 5A

Product Feature:

◆ The module supports two channels of encoder input.

◆ Each encoder channel supports A/B incremental encoder or pulse-directional encoder input.

◆ Each encoder channel supports orthogonal A/B signal input, input voltage 5V,and it supports source and sink input.

◆ The incremental encoder mode supports x1/ x2 / x4 frequency multiplication to be selectable.

◆ The pulse – direction mode supports nondirectional signal, pulse input only.

◆ Each encoder channel supports 1 digital input signal with an input voltage of 5Vdc or 24Vdc.

◆ Each encoder channel supports 1 digital output signal with an output voltage of 24Vdc.

◆ Each encoder channel supports 1 way of 5V power output, which can be connected to the encoder for power supply.

◆ The module internal bus and field input adopt magnetic isolation.

◆ The maximum input frequency of the encoder supported by the module is 1.5MHz.

◆ The module supports measurement function, it could detect the load speed or input signal frequency

BN-8032-L：PROFINET COMM BOARD，CODE: PL， SUPPORTS NO MRP, NO IRT

Product Feature:

 

The BN-8032 Profinet COMM board supports standard Profinet IO Device Communication.

The COMM board supports a max input of 1440 bytes, a max output of 1440 bytes;

The number of extended IO modules it supports is 2 or 4.

BOXIO B32 support 2 IO slots

BOXIO B64 support 2 IO slots

The difference with BN-8032 is without support MRP ,without IRT

BN-8032：PROFINET COMM BOARD，CODE:PN，SUPPORTS MRP, IRT

 

Product Feature:

 

The BN-8032 Profinet COMM board supports standard Profinet IO Device Communication.

The COMM board MRP media redundancy, and it could realize ring network redundancy.

And it supports RT/IRT real-time and synchronous communication mode, with its RT real-time communication minimum period of 1ms and IRT synchronous communication minimum period of 250us.

The COMM boardsupports a max input of 1440 bytes, a max output of 1440 bytes.

The number of  extended IO modules it supports is 2 or 4.

For B32 BOX it can supports 2pcs of IO card

For B64 BOX it can supports 2pcs of IO card

BN-8011：MODBUS-RTU COMM BOARD， CODE: MR

Product Feature:

The BN-8011 Modbus-RTU network adapter supports standard Modbus-RTU communication

01/02/03/04/05/06/15/16/23 function code.

This device could monitor the IO module communication state in real time.

BN-8031：MODBUS-TCP COMM BOARD，CODE: MT

Product Feature:

 

BN-8031 Modbus-TCP COMM board supports standard Modbus-TCP server communication, and the Ethernet supports the

cascading function of dual network port switches.

 

The device supports the simultaneous access of 5 clients.

It supports 01/02/03/04/05/06/15/16 function code and Modbus application of watchdog.

The sum of process data input and output is up to 8192 bytes and it supports 4 extended I/O modules.

The module carries diagnostic function and it could monitor the communication status of the I/O module in real time.

It also supports input and output fault processing and network fault detection.

BN-8021 CANOPEN COMM BOARD, CODE:CA

Product Feature:

The BN-8021 CANopen network adapter module supports standard CANopen communication and supports device specifications DS401.

 

BN-8033：ETHERCAT COMM BOARD, CODE: EC

Product Feature:

The BN-8033 EtherCAT I/O module supports standard EtherCAT protocol access.

The COMM board supports a max input of 1024 bytes and a max output of 1024 bytes.

The number of the extended IO modules it supports is 2 or 4.

B32 box shell support 2 IO slots

B64 box shell support 4 IO slots

BN-8034：ETHERNET/IP COMM BOARD, CODE: EP

Product Feature:

The BN-8034 Ethernet/IP I/O module supports standard Ethernet/IP protocol access.

The COMM board supports a max input of 504 bytes and a max output of 504 bytes.

The number of extended I/O modules supported is 2 or 4.

B32 box shell support 2 IO slots

B64 box shell support 4 IO slots

BT-4234：4-CHANNEL ANALOG OUTPUT /0&4-20MA/15-BIT/16-BIT/ SINGLE ENDED, CODE: P

Product Feature:

◆ 0-20mA or 4-20mA, the two output ranges can be set.

◆ the module internal bus and field output adopts magnetic insulation.

◆ single-terminal grounded together output mode.

◆ the module supports the channel open circuit overload warning function to the corresponding channel.

◆ the module supports LCD display of basic module information and channel indicator display parameters.

BT-4154：4 CHANNELS / VOLTAGE OUTPUT 0~5VDC/0~10VDC/±5VDC/±10VDC,15 BITS /16 BITS, CODE: Q

Product Feature:

 

◆ the module supports 4 channels voltage signal output.

◆ output range：0~5VDC/0~10VDC/±5VDC/±10VDC，15bit/16bit resolution.

◆ module output signal is single – ended common – grounded output.

◆ the module supports the channel overcurrent and over temperature protection warning function to the corresponding channel.

◆ the module supports LCD display of basic module information and channel indicator display parameters.

BT-3724：4 CHANNELS / RTD INPUT / PT1000 / 15BITS / TEMPERATURE ACQUISITION MODULE, CODE: E

Product Feature:

◆ the module supports 4-channel RTD thermal resistance (PT1000) temperature acquisition.

◆ the module could be connected to a 2-wire or 3-wire PT1000 temperature sensor.

◆ the internal bus of the module and field input adopts magnetic isolation.

◆ 15-bit ADC resolution ratio.

◆ the module supports separately disabling specific channels to improve the acquisition speed.

◆ the module supports LCD display of basic module information and channel indicator display parameters.

BT-3714：4 CHANNELS / RTD INPUT / PT100 / 15BITS / TEMPERATURE ACQUISITION MODULE, CODE: D

Product Feature:

◆ the module supports 4-channel RTD thermal resistance (PT100) temperature acquisition.

◆ the module could be connected to a 2-wire or 3-wire PT100 temperature sensor.

◆ the internal bus of the module and field input adopts magnetic isolation.

◆ 15-bit ADC resolution ratio.

◆ the module supports separately disabling specific channels to improve the acquisition speed.

◆ the module supports LCD display of basic module information and channel indicator display parameters.

BT-3244：4 CHANNELS / CURRENT INPUT / 0&4-20MA, ±20MA, 15 BITS, SINGLE-ENDED BIPOLAR, CODE: C

Product Feature:

◆ the module supports 4-channel current signal acquisition.

◆ the module can be configured for 0-20mA, 4-20mA and ±20mA current signal acquisition.

◆ the module supports 2-wire (non-loop output, external power supply is required) current sensor input.

◆ the internal bus of the module and field input adopts magnetic insulation.

◆ the module input channel could be connected to the field active analog signal current output sensor.

◆ the module channel equips with TVS overvoltage protection.

◆ the module supports separately disabling specific channels to improve the acquisition speed.

◆ the module supports LCD display of basic module information and channel indicator display parameters.

BT-3238：8 CHANNELS / CURRENT INPUT /0&4-20MA, 15-BITS, SINGLE ENDED, CODE: B

Product Feature:

◆ the module supports 8-channel current signal acquisition.

◆ the module can be configured for 0-20mA or 4-20mA current signalacquisition.

◆ the module supports 2-wire (non-loop output, external power supply is required) or 4-wire current sensor input.

◆ the internal bus of the module and field input adopts magnetic insulation.

◆ the module input channel could be connected to the field active analog signal current output sensor.

◆ the module channel equips with TVS overvoltage protection.

◆ the module supports separately disabling specific channels to improve the acquisition speed.

◆ the module supports LCD display of basic module information and channel indicator display parameters.

BT-222F：16 CHANNEL / DIGITAL OUTPUT / 24VDC / SOURCE, CODE: 6

Product Feature:

◆ the module supports 16 channels digital output, and the output voltage is 24VDC and the output high level is valid.

◆ the module can drive field equipment. (relay, solenoid valve, etc.)

◆ the internal bus of the module and field output are using opto-coupler.

◆ the module has the functions of thermal shutdown and overcurrent protection.

◆ the module supports short circuit protection and overload protection warning functions to corresponding channels.

◆ the module supports LCD display of basic module information and channel indicator display parameters.

◆ the module supports the fault output processing function when the application layer is disconnected.

BT-124F：16 CHANNEL DIGITAL INPUT / 24VDC /SINK/SOURCE DUAL DIRECTION, CODE: 1

Product Feature:

◆ the module supports 16 channels digital input, supports sink type & source

type input. The input high level (sink type) is valid and the module it could be connected to PNP sensor while the input low level (source type) is valid, and the module it could be connected to NPN sensor.

◆ the module can collect digital output signal of field equipment (dry contact or active output).

◆ the module can be accessed to 2-wire or 3-wire digital sensor.

◆ the internal bus and field input of the module adopts opto-isolator.

◆ the module supports the input signal holding function, and the holding time can be set.

◆ by adding counting sub-module, the counting function is valid.

◆ each input channel of the module supports a 32-bit counter with the counting frequency <200Hz.

◆ the module can be set the digital signal input filtering time and the byte transmission order of the counter.

◆ each channel of the module could be set the counting mode and counting direction independently.

◆ the module supports LCD display of basic module information and channel indicating display parameters

BT-221F：16 CHANNEL / DIGITAL OUTPUT / 24VDC / SINK, CODE: 5

Product Feature:

Module features

◆ the module supports 16 channels digital output; the output voltage is 0V and the output low level is valid.

◆ the module can drive field equipment (relay, solenoid valve, etc.).

◆ the internal bus and field output of the module both adopt electromagnetic isolation.

◆ the module has the function of thermal shutdown and over current protection.

◆ the module supports the short circuit warning function to the corresponding channel.

◆ the module supports the fault output processing function when the applicationlayer is disconnected.

BT-3804：4 CHANNELS ANALOG INPUT / TC / 24BITS / THERMOCOUPLE TEMPERATURE ACQUISITION MODULE, CODE: F

Product Feature:

Module features

◆ the module supports 4-channel thermocouple signal acquisition. ◆ the module supports 9 kinds of conventional thermocouple temperature measurement type. ◆ the internal bus of the module and field input adopts magnetic isolation. ◆ The module input channel supports TVS overvoltage protection. ◆ 24-bit ADC resolution (Σ-δ type). ◆ the module supports separately disabling specific channels to improve the acquisition speed. ◆ the module supports LCD display of basic module information and channel indicator display parameters.

BT-623F 8DI SINK/SOURCE & 8DO SOURCE 24VDC EXPANSION I/O CARD CODE: V

Product Feature:

The BOX I/O module card of BT-623F

with 8 channels / digital input, source & sink /NPN&PNP/  24VDC,

with 8 channels / digital output / source / PNP /, 24Vdc/0.5A

supports counter function (counter frequency up to 200Hz)

BOXIO COMMUNICATION BOARD

Product Feature:

ODOT B series integrated I/O module consists of communication board (COMM board) module and extended IO module.

The COMM board could select the corresponding bus module according to the communication interface of the controller system.

The communication protocols support Modbus, Profibus-DP, Profinet, EtherCAT, EtherNet/IP, CANopen, CC-Link, etc.